Operation Manual of Dry Bulk Cement Tanker Trailer

언제 사용 the bulk cement trailer, do not exceed speed limit or maximum loading capacity. Otherwise, not only it is dangerous to transport, but also will it damage the air compressor and other parts on the tanker.
Do not start or stop the air compressor too quickly, but slowly increase or decrease the speed. Otherwise, the impulse pressure will be damage.
Do not change the rotation direction of the air compressor. Otherwise, the machine will be seriously damaged if the oil pump fail to supply oil.

Check the oil level before starting the machine. The oil level should not be lower than the lowest limit of the oil gauge. It is necessary to check whether the oil pump supplies oil frequently. If it does not supply oil, it must be shut down immediately for inspection. Otherwise, the air compressor will be seriously damaged due to lack of oil.
교체 the 윤활유 oil 정기적으로. After the machine on a new tanker is used for 30 hours, drain the oil in the crankcase, clean the inside of the crankcase and the oil filter screen, and then change the oil. After that, the oil should be changed once a year with the aforemention process.

The lubricating oil used in the machine must be consistent. it is forbidden to mix lubricating oils of different brands. Otherwise, the deterioration of lubricating oil will affect the lubrication outcome.
Maintain and clean the air filter element every 30 hours. While rotateting the filter element, blow compressed air with pressure less than 0.6MPa fro